INSTALLATION INSTRUCTIONS

The Warming Hut Models WH2000 and WH2001 is designed to be wall mounted. Four pre-drilled holes are located in the back of the unit for mounting to wall (hardware not included). Place unit low enough on wall so that older children can reach the coin slots in the top of unit (see picture on home page). If the wall is not leveled or there is not enough support behind the wall, it is recommended to place a piece of wood under the unit along the bottom rear and attach this wood to the wall. This will give additional shear support to the unit. UNIT MUST BE LEVELED VERTICAL for the correct operation of the coin mechanism, if wall is not vertical level, a spacer or shim behind the unit may be necessary.

Make sure The Warming Hut's are placed in high traffic areas and can be easily accessible.

back to services